| Processor |
- Supports Intel®
Pentium® 4 processors
- Supports up to
2.8GHz
|
| Chipset
|
- Intel 845E Chipset
- Supports
533MHz FBS (400 FSB Compatible)
|
| Memory
|
- Supports 3 x
184-pin DIMM sockets
- Supports up to 2GB
DDR / ECC / Non ECC
|
| Devices |
- 2 x 3.5" IDE HDD
cages (internal)
- 1 Slim CD-ROM
drive
- 16 x 2 LCD Display
Panel
|
| PCI slots
|
- One PCI 2.2 32-bit
Master PCI bus slot
|
| On-board IDE
|
- An IDE controller
on the Intel ICH2 chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA66/100
operation modes
- ATA133
RAID supported by Promise controller
|
| On-board I/O
Port |
- 1 x Intel® 82540
1Gbit LAN controller
- 1 x Intel® 82551
10/100Mbps LAN controller
- Integrated ATI
Rage XL graphics controller
- Built-in DVD decoding
- Onboard 8MB Video SDRAM
- On-Board
Peripherals include:
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 serial port (COM 1 rear port)
- 4 USB ports (Rear * 2/ Front * 2)
- 1 VGA port
|
| Hardward
Monitoring |
- On-board voltage
monitors for CPU core/s, 3.3V, -12V, +5V,
5VSB, +12V status monitor
- CPU/chassis
temperature monitoring
- Chassis intrusion
detection
|
|
IPMI Feature (Windows
Only) |
-
Consolidated server health
information
-
Server power status
-
Compliant to IPMI 1.5
-
Support SNMP v.1
-
Remotely monitor server hardware
sensors
-
Configurable sensor thresholds
-
Receive and maintain system event log
-
Configure options to shut down,
reboot, power off the system in response to a hardware component
event
-
Remotely power control including boot
options to boot from hard drive, boot from floppy, boot from CD-ROM,
and boot from service partition.
|
|
Chassis |
|
|
|
Fan |
|
|
|
Power
|
-
200W max. output
-
Active PFC
-
Full range 100~240V
|
|
Bios |
-
The mainboard BIOS provides "Plug &
Play" BIOS which
detects the peripheral devices and expansion cards of the
board automatically.
-
The mainboard provides a Desktop
Management Interface
(DMI) function which records your mainboard specifications.
|
|
Others |
|
|
